LIBRARYSOUNDwalks most engines on one keylight / dark

LIBRARY

LIBRARY puts most of the engines on one key. PRESETS walks all their factory sounds as a single list, with no trip to the wheel.

walks most engines on one key

Half

SOUND

Reach it

a custom build, FELUCCA_LIBRARY=1 (else on SHOCK)

ALGORITHM

the engine's first EDIT knob

Engine

ANALOG

Factory sounds

12

LIBRARY is on the sidelines: SQRL-1's build leaves it out, and SHOCK has its key, E4. A custom build with FELUCCA_LIBRARY=1 brings it back, picked on the PAIR page (hold HOME, tap GLO, KNOB 1).

Playing it

Each step of PRESETS loads the next factory sound, and the engine changes when the list crosses into the next engine's sounds. The list wraps round at the end. Hold GLO and turn PRESETS to jump a whole engine at a time, landing on its first sound. Your saved sounds are not in this list: PRESETS walks them under an engine's own SOUND.

The pages follow the engine that is playing. MAIN shows that engine's own four knobs, EDIT walks its pages, and ALGORITHM turns its first parameter. The tables below show LIBRARY as it starts, on ANALOG; the page for each engine has the rest.

The keys play notes. The screen shows the engine's picture where it has one, and the seed-of-life pattern where it does not.

Engines in the list

• ANALOG
• FM6
• PHASE
• LOFI
• SAMPLE
• VOICE
• TRIO
• WHEEL
• GRAIN
• PHYS
• LIZARD
• SHOCK
• SYLLABLE
• ORGAN
• MOUTH

MAIN

Pages

OSC

Knob	Label	Range	Starts at
1	WAVE	SAW SQR TRI SIN PWM SYNC SUB	SAW
2	DTN	0ct .. 127ct	12ct
3	MIX	0% .. 100%	50%
4	NOIS	0% .. 100%	0%

FLT

Knob	Label	Range	Starts at
1	CUT	30Hz .. 16.0kHz	2.5kHz
2	RES	0% .. 100%	24%
3	DRV	0% .. 100%	8%
4	KTR	0% .. 100%	50%

FILTER

Knob	Label	Range	Starts at
1	TYPE	LP BP HP	LP
2	CUT	30Hz .. 16.0kHz	2.5kHz
3	RES	0% .. 100%	24%
4	KTR	0% .. 100%	50%

Where it comes from

LIBRARY is part of the shell, firmware/src/shell.c (CH_ENGINES lists the engines in the order PRESETS walks them). The engines are Felucca's and databurn's; their pages credit each one.